용접규격(알루미늄): 지상 전투차량
Regular price
$31.46
Sale price
Regular price
✈️
Estimated delivery date 예상 배송일
Standard Shipping
불러오는 중...
주문일로부터 8-12 영업일
Express Shipping
불러오는 중...
주문일로부터 6-8 영업일
TACOM 12472301(REV), 지상 전투차량 용접 코드: 알루미늄(03-JAN-2008), 이 코드는 지상 전투 알루미늄합금 구조와 구성 요소의 제조에 적용되는 용접 요구사항에 관해 설명한다. 이것은 재료설계 및 구성에 적합한 상호 보완적인 코드 또는 사양과 함께 사용하여야 한다.
이것은 ASME 보일러와 압력용기 코드 또는 항공우주 코드와 같은 특수한 제조에 사용하기 위해 개발한 코드들을 대신하는 것은 아니며, 방탄과 비방탄 기본구조, 지지구조와 부속물의 제작 사용에 적합하다.
구조의 모든 유형에 기본적인 공통 요구사항은 1~7절에 설명되고, 용접구조물의 용도에 기초한 품질요건의 독점적인 관련 규정은 8, 9, 10절에 포함된다. 이 코드는 상용 및 군용규격인 ANSI/AWS의 B2.1, ANSI/AWS D1.2, MIL-STD 1946 MIL-STD 372에 기초하고 있다. 이 문서는 미국 국방성, LP, 지상 시스템 사업부(UDLP)와 미국 육군의 탱크-자동차 군비연구, 개발과 엔지니어링 센터(TARDEC)에서 팀에 의해 준비했다.
이것은 ASME 보일러와 압력용기 코드 또는 항공우주 코드와 같은 특수한 제조에 사용하기 위해 개발한 코드들을 대신하는 것은 아니며, 방탄과 비방탄 기본구조, 지지구조와 부속물의 제작 사용에 적합하다.
구조의 모든 유형에 기본적인 공통 요구사항은 1~7절에 설명되고, 용접구조물의 용도에 기초한 품질요건의 독점적인 관련 규정은 8, 9, 10절에 포함된다. 이 코드는 상용 및 군용규격인 ANSI/AWS의 B2.1, ANSI/AWS D1.2, MIL-STD 1946 MIL-STD 372에 기초하고 있다. 이 문서는 미국 국방성, LP, 지상 시스템 사업부(UDLP)와 미국 육군의 탱크-자동차 군비연구, 개발과 엔지니어링 센터(TARDEC)에서 팀에 의해 준비했다.
Couldn't load pickup availability
출판사 리뷰
출판사 리뷰
목차
목차
서문 (Preface)
1 일반조항 (GENERAL PROVISIONS)
1.1 범위(Scope)
1.2 승인(Approval)
1.3 재료(Materials)
1.4 용접공정(Welding Processes)
1.5 장비 교정(Equipment Calibration)
1.6 정의(Definitions)
1.7 용접기호(Welding Symbols)
1.8 안전 주의사항(Safety Precautions)
1.9 측정의 표준단위(Standard Units of Measurement)
2 일반 설계기준은 이 코드에서 배제되었음
3 일솜씨(WORKMANSHIP)
3.1 일반(General)
3.2 모재의 준비(Preparation of Base Material)
3.3 조립(Assembly)
3.4 변형과 수축의 제어(Control of Distortion and Shrinkage)
3.5 용접 단면(Weld Profiles)
3.6 재작업/수정(Rework/Repairs)
3.7 완성용접의 청결(Cleaning of Completed Welds)
4 기술(TECHNIQUE)
Part A GMAW, GTAW, PAW(가변 극성)의 일반 요구사항
General Requirements For Gas Metal Arc, Gas Tungsten Arc, Plasma Arc(Variable Polarity) Welding
4.1 재료 요구사항(Material Requirements)
4.2 용접공정(Welding Processes)
4.3 보호 가스(Shielding Gases)
4.4 예열 요구사항(Preheat Requirements)
4.5 층간 온도 요구사항(Inter pass Temperature Requirements)
4.6 아크 스트라이크(Arc Strikes)
4.7 용접 전 청결(Cleaning Prior to Welding)
4.8 용접종료(Termination)
4.9 용락 방지용 백킹(Backing to Prevent Melting Through)
4.10 피닝(Peening)
4.11 응력완화 열처리(Thermal Stress-Relief Treatment)
Part B GMAW(Gas Metal Arc Welding)
4.12 일반(General)
4.13 단일전극 GMAW에 대한 제한(Restrictions on GMAW With Single Electrode)
Part C GTAW 일반 요구사항(General Requirements Gas Tungsten Arc Welding)
4.14 일반(General)
4.15 텅스텐 전극(Tungsten Electrodes)
4.16 GTAW에 대한 제한(Restrictions on Gas Tungsten Arc Welding)
Part D PAW(Plasma Arc Welding)
4.17 일반(General)
4.18 텅스텐 전극(Tungsten Electrodes)
4.19 가변 극성 PAW의 제한(Restrictions on Variable Polarity PAW)
5 절차 및 인력의 인증요건(QUALIFICATIONS OF PROCEDURES AND PERSONNEL)
Part A 일반요구사항(General Requirements)
5.1 일반(General)
5.2 용접절차의 인증(Qualification of Welding Procedures)
5.3 용접사, 자동용접사, 가접사의 인증 (Qualification of Welders, Welding Operators, and Tack Welders)
5.4 인증 책임(Qualification Responsibility)
5.5 기록(Records)
5.6 시험 용접의 자세(Position of Test Welds)
Part B 시험 종류, 시험방법과 판정 기준(Types of Tests, Test Methods and Acceptance Criteria)
5.7 종류 및 시험의 목적(Types and Purposes of Tests)
5.8 육안검사(Visual Examination)
5.9 인장시험-홈 용접(Tension Tests - Groove Welds)
5.10 굽힘 시험 - 홈 용접 - 판과 파이프(Bend Tests - Groove Welds - Plate and Pipe)
5.11 건전성 시험 - 필릿 용접(Soundness Tests - Fillet Welds)
5.12 방사선 투과시험(Radiographic Examination)(Optional for performance qualification groove welds, plate)
Part C 절차인증(Procedure Qualification)
5.13 일반(General)
5.14 절차를 위한 인증 자세의 제한(Limits of Qualified Positions for Procedures)
5.15 시험 용접구조물의 준비-절차인증(Preparation of Test Weldment - Procedure Qualification)
5.16 변수의 제한-절차인증(Limitation of Variables-Procedure Qualification)
5.17 시험-절차인증(Tests-Procedure Qualification)
5.18 재시험(Retests)
Part D 절차인증(Performance Qualification)
5.19 일반(General)
5.20 수행을 위한 인증 자세의 제한(Limits of Qualified Positions for Performance)
5.21 시험 용접구조물의 준비-수행인증(Preparation of Test Weldments-Performance Qualification)
5.22 변수의 제한-용접사 수행인증(Limitation of Variables - Welder Performance Qualification)
5.23 변수의 제한-자동용접사 수행인증(Limitation of Variables-Welding Operator Performance Qualification)
5.24 변수의 제한 - 가접사 수행인증(Limitation of Variables - Tack Welder Performance Qualification)
5.25 시험-수행인증(Tests - Performance Qualification)
5.26 재시험(Retests)
5.27 유효기간(Period of Effectiveness)
6 검사(INSPECTION)
Part A 일반요구사항(General Requirements)
6.1 일반(General)
6.2 재료의 검사(Inspection of Materials)
6.3 용접절차와 시험의 검사(Inspection of Welding Procedure Qualification and Equipment)
6.4 용접사, 자동용접사, 가접사 인증의 검사(Inspection of Welder, Welding Operator, and Tack Welder Qualifications)
6.5 작업과 기록의 검사(Inspection of Work and Records)
6.6 계약자의 의무(Obligations of the Contractor)
6.7 비파괴검사(Nondestructive Testing)
Part B 방사선 검사(Radiographic Inspection)
6.8 일반(General)
6.9 시험 범위(Extent of Testing)
6.10 방사선시험 절차(Radiographic Procedures)
6.11 용접 허용(Acceptability of Welds)
6.12 방사선사진 검사, 보고와 처분(Examination, Report, and Disposition of Radiographs)
Part C 홈 용접의 초음파검사(Ultrasonic Testing of Groove Welds)
6.13 일반(General)
7 스터드 용접(STUD WELDING)
Part A 일반요구사항(General Requirements)
7.1 일반(General)
Part B 스터드 아크용접(Arc Stud Welding)
7.2 일반 요구사항(General Requirements)
7.3 재료 요구사항(Material Requirements)
7.4 일솜씨(Workmanship)
7.5 기법(Technique)
7.6 인증 요구사항(Qualification Requirements)
7.7 오퍼레이터와 생산 전 인증(Operator and Pre-production Qualification)
7.8 허용기준-생산용접(Acceptance Criteria-Production Welds)
7.9 불량 스터드(Mislocated Studs)
7.10 잘못된 스터드의 수정(Repair of Misapplied Studs)
Part C 콘덴서 방전 스터드 용접(Capacitor Discharge Stud Welding)
7.11 일반 요구사항(General Requirements)
7.12 재료 요구사항(Material Requirements)
7.13 일솜씨(Workmanship)
7.14 기법(Technique)
7.15 인증 요구사항(Qualification Requirements)
7.16 오퍼레이터와 생산 전 인증(Operator and Pre-production Qualification)
7.17 허용기준-생산용접(Acceptance Criteria-Production Welds)
7.18 불량 스터드(Mislocated Studs)
7.19 잘못된 스터드의 수정(Repair of Misapplied Studs)
8 비치명적 용접(NON-CRITICAL WELDING)
Part A 일반 요구사항(General Requirements)
8.1 적용(Application)
8.2 모재(Base Metal)
8.3 용접봉(Filler Metal)
Part B 일솜씨(Workmanship)
8.4 치수 공차(Dimensional Tolerances)
8.5 가접(Temporary Welds)
8.6 용접종료(Weld Termination)
8.7 용접품질(Quality of Welds)
9 치명적 용접(방탄 구조 제외) [CRITICAL WELDING(Except Ballistic Structures)]
Part A 일반 요구사항(General Requirements)
9.1 적용(Application)
9.2 모재(Base Metal)
9.3 용접봉(Filler Metal)
Part B 일솜씨(Workmanship)
9.4 치수 공차(Dimensional Tolerances)
9.5 가접(Temporary Welds)
9.6 용접종료(Weld Terminations)
9.7 용접품질(Quality of Welds)
10 방탄 용접(BALLISTIC WELDING)
Part A 일반 요구사항(General Requirements)
10.1 적용(Application)
10.2 모재(Base Metal)
10.3 용접봉(Filler Metal)
Part B 일솜씨(Workmanship)
10.4 가접(Temporary Welds)
10.5 용접종료(Weld Terminations)
10.6 방탄 인증(Ballistic Certification)
10.7 매크로 시편(Macro Specimens)
10.8 용접품질(Quality of Welds)
10.9 방탄 충격시험 절차(Ballistic Shock Test Procedure)
부록 APPENDICES
부록 A 표준 목록
부록 B 용접유형(WELD TYPES)
부록 C 대체 방사선 시료 채취 계획(ALTERNATIVE RADIOGRAPHIC SAMPLING PLAN)
1 일반조항 (GENERAL PROVISIONS)
1.1 범위(Scope)
1.2 승인(Approval)
1.3 재료(Materials)
1.4 용접공정(Welding Processes)
1.5 장비 교정(Equipment Calibration)
1.6 정의(Definitions)
1.7 용접기호(Welding Symbols)
1.8 안전 주의사항(Safety Precautions)
1.9 측정의 표준단위(Standard Units of Measurement)
2 일반 설계기준은 이 코드에서 배제되었음
3 일솜씨(WORKMANSHIP)
3.1 일반(General)
3.2 모재의 준비(Preparation of Base Material)
3.3 조립(Assembly)
3.4 변형과 수축의 제어(Control of Distortion and Shrinkage)
3.5 용접 단면(Weld Profiles)
3.6 재작업/수정(Rework/Repairs)
3.7 완성용접의 청결(Cleaning of Completed Welds)
4 기술(TECHNIQUE)
Part A GMAW, GTAW, PAW(가변 극성)의 일반 요구사항
General Requirements For Gas Metal Arc, Gas Tungsten Arc, Plasma Arc(Variable Polarity) Welding
4.1 재료 요구사항(Material Requirements)
4.2 용접공정(Welding Processes)
4.3 보호 가스(Shielding Gases)
4.4 예열 요구사항(Preheat Requirements)
4.5 층간 온도 요구사항(Inter pass Temperature Requirements)
4.6 아크 스트라이크(Arc Strikes)
4.7 용접 전 청결(Cleaning Prior to Welding)
4.8 용접종료(Termination)
4.9 용락 방지용 백킹(Backing to Prevent Melting Through)
4.10 피닝(Peening)
4.11 응력완화 열처리(Thermal Stress-Relief Treatment)
Part B GMAW(Gas Metal Arc Welding)
4.12 일반(General)
4.13 단일전극 GMAW에 대한 제한(Restrictions on GMAW With Single Electrode)
Part C GTAW 일반 요구사항(General Requirements Gas Tungsten Arc Welding)
4.14 일반(General)
4.15 텅스텐 전극(Tungsten Electrodes)
4.16 GTAW에 대한 제한(Restrictions on Gas Tungsten Arc Welding)
Part D PAW(Plasma Arc Welding)
4.17 일반(General)
4.18 텅스텐 전극(Tungsten Electrodes)
4.19 가변 극성 PAW의 제한(Restrictions on Variable Polarity PAW)
5 절차 및 인력의 인증요건(QUALIFICATIONS OF PROCEDURES AND PERSONNEL)
Part A 일반요구사항(General Requirements)
5.1 일반(General)
5.2 용접절차의 인증(Qualification of Welding Procedures)
5.3 용접사, 자동용접사, 가접사의 인증 (Qualification of Welders, Welding Operators, and Tack Welders)
5.4 인증 책임(Qualification Responsibility)
5.5 기록(Records)
5.6 시험 용접의 자세(Position of Test Welds)
Part B 시험 종류, 시험방법과 판정 기준(Types of Tests, Test Methods and Acceptance Criteria)
5.7 종류 및 시험의 목적(Types and Purposes of Tests)
5.8 육안검사(Visual Examination)
5.9 인장시험-홈 용접(Tension Tests - Groove Welds)
5.10 굽힘 시험 - 홈 용접 - 판과 파이프(Bend Tests - Groove Welds - Plate and Pipe)
5.11 건전성 시험 - 필릿 용접(Soundness Tests - Fillet Welds)
5.12 방사선 투과시험(Radiographic Examination)(Optional for performance qualification groove welds, plate)
Part C 절차인증(Procedure Qualification)
5.13 일반(General)
5.14 절차를 위한 인증 자세의 제한(Limits of Qualified Positions for Procedures)
5.15 시험 용접구조물의 준비-절차인증(Preparation of Test Weldment - Procedure Qualification)
5.16 변수의 제한-절차인증(Limitation of Variables-Procedure Qualification)
5.17 시험-절차인증(Tests-Procedure Qualification)
5.18 재시험(Retests)
Part D 절차인증(Performance Qualification)
5.19 일반(General)
5.20 수행을 위한 인증 자세의 제한(Limits of Qualified Positions for Performance)
5.21 시험 용접구조물의 준비-수행인증(Preparation of Test Weldments-Performance Qualification)
5.22 변수의 제한-용접사 수행인증(Limitation of Variables - Welder Performance Qualification)
5.23 변수의 제한-자동용접사 수행인증(Limitation of Variables-Welding Operator Performance Qualification)
5.24 변수의 제한 - 가접사 수행인증(Limitation of Variables - Tack Welder Performance Qualification)
5.25 시험-수행인증(Tests - Performance Qualification)
5.26 재시험(Retests)
5.27 유효기간(Period of Effectiveness)
6 검사(INSPECTION)
Part A 일반요구사항(General Requirements)
6.1 일반(General)
6.2 재료의 검사(Inspection of Materials)
6.3 용접절차와 시험의 검사(Inspection of Welding Procedure Qualification and Equipment)
6.4 용접사, 자동용접사, 가접사 인증의 검사(Inspection of Welder, Welding Operator, and Tack Welder Qualifications)
6.5 작업과 기록의 검사(Inspection of Work and Records)
6.6 계약자의 의무(Obligations of the Contractor)
6.7 비파괴검사(Nondestructive Testing)
Part B 방사선 검사(Radiographic Inspection)
6.8 일반(General)
6.9 시험 범위(Extent of Testing)
6.10 방사선시험 절차(Radiographic Procedures)
6.11 용접 허용(Acceptability of Welds)
6.12 방사선사진 검사, 보고와 처분(Examination, Report, and Disposition of Radiographs)
Part C 홈 용접의 초음파검사(Ultrasonic Testing of Groove Welds)
6.13 일반(General)
7 스터드 용접(STUD WELDING)
Part A 일반요구사항(General Requirements)
7.1 일반(General)
Part B 스터드 아크용접(Arc Stud Welding)
7.2 일반 요구사항(General Requirements)
7.3 재료 요구사항(Material Requirements)
7.4 일솜씨(Workmanship)
7.5 기법(Technique)
7.6 인증 요구사항(Qualification Requirements)
7.7 오퍼레이터와 생산 전 인증(Operator and Pre-production Qualification)
7.8 허용기준-생산용접(Acceptance Criteria-Production Welds)
7.9 불량 스터드(Mislocated Studs)
7.10 잘못된 스터드의 수정(Repair of Misapplied Studs)
Part C 콘덴서 방전 스터드 용접(Capacitor Discharge Stud Welding)
7.11 일반 요구사항(General Requirements)
7.12 재료 요구사항(Material Requirements)
7.13 일솜씨(Workmanship)
7.14 기법(Technique)
7.15 인증 요구사항(Qualification Requirements)
7.16 오퍼레이터와 생산 전 인증(Operator and Pre-production Qualification)
7.17 허용기준-생산용접(Acceptance Criteria-Production Welds)
7.18 불량 스터드(Mislocated Studs)
7.19 잘못된 스터드의 수정(Repair of Misapplied Studs)
8 비치명적 용접(NON-CRITICAL WELDING)
Part A 일반 요구사항(General Requirements)
8.1 적용(Application)
8.2 모재(Base Metal)
8.3 용접봉(Filler Metal)
Part B 일솜씨(Workmanship)
8.4 치수 공차(Dimensional Tolerances)
8.5 가접(Temporary Welds)
8.6 용접종료(Weld Termination)
8.7 용접품질(Quality of Welds)
9 치명적 용접(방탄 구조 제외) [CRITICAL WELDING(Except Ballistic Structures)]
Part A 일반 요구사항(General Requirements)
9.1 적용(Application)
9.2 모재(Base Metal)
9.3 용접봉(Filler Metal)
Part B 일솜씨(Workmanship)
9.4 치수 공차(Dimensional Tolerances)
9.5 가접(Temporary Welds)
9.6 용접종료(Weld Terminations)
9.7 용접품질(Quality of Welds)
10 방탄 용접(BALLISTIC WELDING)
Part A 일반 요구사항(General Requirements)
10.1 적용(Application)
10.2 모재(Base Metal)
10.3 용접봉(Filler Metal)
Part B 일솜씨(Workmanship)
10.4 가접(Temporary Welds)
10.5 용접종료(Weld Terminations)
10.6 방탄 인증(Ballistic Certification)
10.7 매크로 시편(Macro Specimens)
10.8 용접품질(Quality of Welds)
10.9 방탄 충격시험 절차(Ballistic Shock Test Procedure)
부록 APPENDICES
부록 A 표준 목록
부록 B 용접유형(WELD TYPES)
부록 C 대체 방사선 시료 채취 계획(ALTERNATIVE RADIOGRAPHIC SAMPLING PLAN)
저자
저자
정점진
Payment & Security
Payment methods
Your payment information is processed securely. We do not store credit card details nor have access to your credit card information.

